Manufacturer supply CNC glass cutting machine with Italy technology

Specifications

CNC glass cutting machine with Italy technology
1.controlled by computer
2.every shape glass available to cut
3.automatic op

Manufacturer supply CNC glass cutting machine with Italy technology

 

 

SZ-3726 CNC SHAPED GLASS CUTTING TABLE

 

Equipped with:

Control panel with incorporated independent Computer WiFi and 21" Touch Screen , software packet with optimization program developed in Multitasking systems  with 250 parametric preconstructed shapes, user graphic interface for the managing of the cutting cycle and machine monitoring , hydraulic tilting surface, air cushion,  ventilator for the movement of the sheet on the surface, , double zero for the cutting of laminated glass, security systems following the laws,handbook in English.

Max. workable glass sheet mm. 3700x2600.

Workable thickness From 2 to 19 mm (0.079 to 0.748 in). Machine can cut every kind of glass (except tempered ones)

Safety of the glass presence:
A sensor is placed on the cutting head, to stop the machine in case of lack of glass sheets
Management of mechanisms:Immediate and controlled braking of the bridge and the cutting head, as soon as an emergency occurs.

 

Concept of Production and Assembly

 

We has developed a new concept of building machines, every single part of the machine are designed with 3D CAD technology, processed  by  CAD CAM and machined with CNC Working Center.
This innovative system is the only one can guarantee perfect uniformity and constant quality of all the machines that are being built and every single parts of machines can be easy to replace if needed, even the felt table surface.
Machines assembly is divided into specific steps, controlled by a management software chart, which supports and guide our technicians during the various stages of assembly, the  following picture is some example of assembly step:

 

 

 

 

 

 

Sliding systems:
Sliding systems of the bridge are made with a pinion-rack system. The racks and the pinions are tempered and refaced. They have a ± 0.02 mm tolerance with 1.20 mt (47.24 in) length. The teeth racks are turned towards low. One pinion are placed on the two sides of the bridge (two in all), to keep always perpendicular the bridge to the cutting table during the acceleration and deceleration phases.
On Two side of the table is applied one linear guide and one rack, to obtain a overall bridge stability during the cutting cycle.

Hydraulic tilting systems:
Hydraulic with 2 cylinders with anti-fall safety valves. A valve splits the oil flow up on the hydraulic power cabinet, to guarantee a long duration of the simultaneousness of going up and down of the pistons. This avoids shakes and vibrations of the work surface through the  time.

Cutting bridge:
The cutting bridge is made in rigid Steel. The whole system is very stable and insensitive to temperature changes, assuring a minimum wear and tear.
Cut trolley Made in aluminium. The cutting head is made with special machines with hundredth tolerances. Going up and down system of the cutting head is guided by a system with re-circulation of ball-bearings, to reduce the friction as much as possible and guarantee the cutting  head reply to glass sinkings.

 

Glass sheet squaring:
The alignment of glass sheet is automatic trought laser 3Directions.
Work surface Made in very hard wood, covered with woollen felt of high density and compactness, 4 mm thick (0.157 in).

 

Laser scanning 
Laser System for copying of the shapes, of any material, with double control of the correct survey of the points.

 

 

User interface:
On a  Multitasking systems, control of  three interpolated axles, easy-to-use, with icons and buttons of the relevant command, with Computer WiFi and 21" Touch Screen.
Optimisation program:
Optimization software PerfectCut
Included a 250 parametric shapes library, import/export data.

  Low-e removal system 
The low-e removal happens through a system fixed on cutting head, positioned in front of the cutting system. It deals with a metallic router that allows of remove the coating of  the glass both in rectilinear that in shaped. The quality of remove is better than the classical grinding wheel.
The wire brush, which removes the coating,is put in rotation by a Electric motor that running at 20.000 rpm.
Coating must be removed before cutting.

Label Printer on PC cabinet 
Professional Label Printer is  fixed directly on board of PC cabinet.
That facilitates the work of manual labeling single pieces of glass, since machine operator can print all the labels of the single glass sheet directly from the interface of the cutting table without any confusion and without wait for it from office people.

Film cutting-Vinil for design the patten of sandblasting processing

If you are interested in it, please feel free let me know.

 

 

Produktgruppe : Glasschneidemaschine